HP Netserver L Server series User Manual
Page 52
Chapter 5
Error Message Reference
48
Code
Description
Recommended Action
4. Change the system board.
0341h
Undefined or
invalid command in
Random Test.
1. Try a different diskette.
2. Check the cable between the floppy drive and the system board.
3. Change the floppy drive.
4. Change the system board.
0342h
Address mark not
found in Random
Test
1. Try a different diskette.
2. Check the cable between the floppy drive and the system board.
3. Change the floppy drive.
4. Change the system board.
0344h
Requested sector
not found in
Random Test.
1. Try a different diskette.
2. Check the cable between the floppy drive and the system board.
3. Change the floppy drive.
4. Change the system board.
0345h
Reset failed in
Random Test.
1. Try a different diskette.
2. Check the cable between the floppy drive and the system board.
3. Change the floppy drive.
4. Change the system board.
0347h
Drive parameter
activity failed in
Random Test.
1. Try a different diskette.
2. Check the cable between the floppy drive and the system board.
3. Change the floppy drive.
4. Change the system board.
0348h
DMA overrun error
in Random Test.
1. Try a different diskette.
2. Check the cable between the floppy drive and the system board.
3. Change the floppy drive.
4. Change the system board.
0349h
Attempt to DMA at
64 KB boundary in
Random Test.
1. Try a different diskette.
2. Check the cable between the floppy drive and the system board.
3. Change the floppy drive.
4. Change the system board.
0350h
CRC or ECC data
error in Random
Test.
1. Try a different diskette.
2. Check the cable between the floppy drive and the system board.
3. Change the floppy drive.
4. Change the system board.
0360h
Seek operation
failed in Random
Test.
1. Try a different diskette.
2. Check the cable between the floppy drive and the system board.
3. Change the floppy drive.
4. Change the system board.
03FEh
Diskette data
read/write error in
Sequential Test.
1. Try a different diskette.
2. Check the cable between the floppy drive and the system board.
3. Change the floppy drive.
4. Change the system board.
0380h
Drive not ready.
1. Try a different diskette.