HP StorageWorks 2000fc G2 Modular Smart Array - Manual (Page 45)

HP StorageWorks Simple SAN Connection Manager user guide 45
• If the navigation pane displays the Storage Subsystem - Logical Disk View, the root is called
Subsystem - Logical Disk.
• If the navigation pane displays the Server - Storage View, the root is called Server - Logical Disk.
2. The content pane opens a topology map. If the map shown is Physical Connection map, click the LUN
Assignment Map tab to bring that map forward.
Viewing the event log
The event log lists all Simple SAN Connection Manager-initiated actions and the results for the host, HBAs,
switches, and storage subsystems. The event log begins recording when Simple SAN Connection Manager
is running. Event log entries are formatted by type, time stamp, category, source, event ID, and description.
The log holds a maximum of 1,999 entries. When the maximum is reached, the event list wraps, and the
oldest events are discarded and replaced with the new events.
The Type column icon and text indicate an entry’s severity:
Info indicates information only.
Warning indicates a minor warning condition.
Error indicates an error condition.
To view the event log:
• On the File menu, click Event Log.
The Application Event Log dialog box (
Figure 23 ) opens.
Figure 23 Application Event Log dialog box
To clear the entire event log:
• On the bottom of the Application Event Log dialog box, click the Clear Logs button. The event log is
emptied and ready for more entries.
To clear specific entries:
1. Right-click a specific event log entry (to select multiple entries, click the entries while holding down the
CTRL key).
2. On the shortcut menu, click Delete Entry to remove the selected entries from the event log.