HP StorageWorks 2000fc G2 Modular Smart Array - Manual (Page 124)

124 Managing storage subsystems
The next Storage Deployment wizard window ( Figure 95 ) lists each server and its operating system.
Figure 95 Storage Deployment wizard: select servers (template deployment)
5. Under Server Name, select one or more check boxes indicating the server(s) to which you want to
assign (present) the logical disks in this storage subsystem, and then click Next.
NOTE: In general, you should select just one server. However, if each server represents one node
in a clustered environment, you can select two or more servers. If you choose not to select any
servers, you must later manually assign the LUNs defined in this deployment to the servers (see
“Assigning and unassigning a logical disk to a server” on page 95).
Before proceeding with configuring the storage subsystem with the selected option, the wizard displays
a summary of the selection and resulting actions, as shown in Figure 96 .
Figure 96 Storage Deployment wizard: summary (template deployment)