HP StorageWorks 2000fc G2 Modular Smart Array - Manual (Page 41)

HP StorageWorks Simple SAN Connection Manager user guide 41
Figure 20 Perform Other Operations dialog box
15. If you clicked Perform Other Operations on the Welcome... Configure Your SAN dialog box, select
from these common SAN configuration operations:
Logical Disk and Partition Operations:
• Click Assign Logical Disk to Server to open the Logical Disk Server Presentation dialog box (see
“Assigning and unassigning a logical disk to a server” on page 95).
• Click Create & Manage Partitions to open the Create & Manage Partitions dialog box (see
“Creating and managing partitions” on page 105).
• Click Expand Logical Disk Size to open the Expand Logical Disk dialog box (see “Expanding a
logical disk” on page 97).
• Click Delete Logical Disk to open the Delete Logical Disk dialog box (see “Deleting a logical
disk” on page 98).
Drive Operations:
• Click Manage Hot Spare Drive to set or remove a drive as a hot spare from the Manage Storage
Subsystem dialog box (see “Managing storage subsystems” on page 116).
• Click Blink Drive LED to flash a drive’s LED from the Manage Storage Subsystem dialog box (see
“Managing storage subsystems” on page 116).
Switch Operations:
• Click Set Switch IP Address to open the Set Switch IP Address dialog box (see “Setting the switch
IP address” on page 55).
• Click Update Switch Firmware to open the Switch Firmware Update wizard (see “Updating
switch firmware” on page 57).
HBA Operations:
• Click Update HBA BIOS to open the Update HBA BIOS wizard (see “Updating an HBA BIOS
image” on page 76).