HP Designjet T920 ePrinter series User Manual
Page 67
●
To trim the leading edge of the paper if it is damaged or not straight. The cut strip falls into the basket.
●
To feed and cut the paper when the automatic cutter has been disabled.
●
To cancel the waiting time and print the available pages immediately, if the printer is waiting to nest
more pages (T1500 series only).
NOTE:
The printhead is serviced after each print, and the paper cannot be cut until the process completes,
so you may notice a delay.
NOTE:
Photo and coated paper requires careful handling, see
The print is scuffed or scratched
.
TIP:
To move the paper without cutting it, see
ENWW
Feed and cut the paper
59
This manual is related to the following products: