Uninstall the printer software (windows), Bonjour connection – HP Designjet T920 ePrinter series User Manual
Page 25
virtually anywhere. To use HP Designjet ePrint & Share, you must create a free password-protected
account to protect your documents.
If you have enabled Web Services on your printer, you can print to your printer by email. You can find
the email address in the printer's front panel: press
, then
. Then send the file you want to
print to that email address as an attachment. You can also use your HP Designjet ePrint & Share account
to print remotely to your ePrinter.
Uninstall the printer software (Windows)
1.
Insert the HP Start-up Kit DVD into your DVD drive. If the DVD does not start automatically, run the
setup.exe program in the root folder of the DVD.
2.
Navigate to the Software Installation button and press it.
3.
Press the Install Software button, and follow the instructions on your screen to uninstall the printer
software.
Connect a computer to the printer by network (Mac OS X)
You can connect your printer to a network under Mac OS X by using the following methods:
●
Bonjour
●
TCP/IP
TIP:
Bonjour is are recommended for your local network; TCP/IP is recommended for other networks.
The following instructions apply if you intend to print from software applications using a printer driver. See
for alternative ways of printing.
Before you begin, check your equipment:
●
The printer should be set up and on.
●
The Ethernet switch or router should be on and functioning correctly.
●
The printer and the computer should be connected to the (wired or wireless) network. See
printer to your network on page 15
Now you can proceed to install the printer software and connect to your printer.
Bonjour connection
1.
Go to the front panel and press
, then
. Note the mDNS service name of your printer.
2.
For best performance while using the HP driver, you are recommended to change the Bonjour Highest
Priority Service from IPP Printing to 9100 Printing. You can change this setting from the Embedded
Web Server (see
Access the Embedded Web Server on page 39
): select Networking > Other settings >
Bonjour settings, change setting as indicated, then click Apply.
3.
Insert the HP Start-up Kit DVD into your DVD drive.
4.
Open the DVD icon on your desktop.
5.
Open the Mac OS X HP Designjet Installer.
6.
Follow the instructions on your screen.
ENWW
Uninstall the printer software (Windows)
17