HP ProLiant DL360 G7 Server - Manual (Page 8)

Component identification 8
Front panel LEDs and buttons
Item Description Status
1 UID LED/button Blue = Identification is activated.
Flashing blue = System is being managed remotely.
Off = Identification is deactivated.
2 Health LED Green = System health is normal.
Amber = System health is degraded. To identify the component in a
degraded state, see "Systems Insight Display LEDs (on page 13 )".
Red = System health is critical. To identify the component in a critical
state, see "Systems Insight Display LEDs (on page 13 )".
Off = System health is normal (when in standby mode).
3 Power On/Standby button
and system power LED Green = System is on.
Amber = System is in standby, but power is still applied.
Off = Power cord is not attached, power supply failure has occurred,
no power supplies are installed, facility power is not available, or the
power button cable is disconnected.
Rear panel components