Online spare population guidelines, Single-processor online spare population order, Multi-processor online spare population order – HP ProLiant DL360 G7 Server User Manual
Page 43
Hardware options installation 43
o
Last: G and H
o
Do not populate slots C, F, or I.
•
UDIMM
o
First: A and B
o
Last: D and E
o
Do not populate slots C, F, G, H, or I.
After installing the DIMMs, use RBSU to configure the system for Lockstep memory support ("
" on page
Online Spare population guidelines
For Online Spare mode configurations, observe the following guidelines:
•
Observe the general DIMM slot population guidelines (on page
•
DIMM configuration on each channel of a processor must be identical.
•
Each processor must have a valid Online Spare configuration.
•
In multi-processor configurations, each processor can have a different valid Online Spare
configuration.
Single-processor Online Spare population order
For Online Spare mode configurations with a single processor, populate the DIMM slots in the following
order:
•
RDIMM
o
First: A, B, and C
o
Next: D, E, and F
o
Last: G, H, and I
•
UDIMM
o
First: A, B, and C
o
Last: D, E, and F
o
Do not populate slots G, H, and I.
After installing the DIMMs, use RBSU to configure the system for online spare memory support ("
" on page
Multi-processor Online Spare population order
For Online Spare mode configurations with a multiple processors, populate the DIMM slots for each
processor in the following order:
•
RDIMM
o
First: A, B, and C
o
Next: D, E, and F
o
Last: G, H, and I
•
UDIMM