HP ProLiant DL360 G7 Server - Manual (Page 62)

Hardware options installation 62
10. Install the graphics adapter in slot 2 on the PCI riser board assembly.
11. Install the PCI riser board assembly (on page 23 ).
12. Connect the PCI power cable to the connector on the 150W graphics adapter and the system board.
13. Install the air baffle (on page 21 ).
14. If removed, install the BBWC battery pack or the FBWC capacitor pack (" Installing the BBWC battery
pack or the FBWC capacitor pack " on page 57 ).
15. Install the access panel (on page 20 ).
16. Slide the server into the rack.
17. Power up the server (on page 18 ).
Redundant hot-plug power supply option