beautypg.com

Nmi jumper, Systems insight display leds – HP ProLiant DL360 G7 Server User Manual

Page 13

background image

Component identification 13

NMI jumper

The NMI jumper allows administrators to perform a memory dump before performing a hard reset. Crash

dump analysis is an essential part of eliminating reliability problems, such as hangs or crashes in OSs, device

drivers, and applications. Many crashes can freeze a system, requiring you to do a hard reset. Resetting the
system erases any information that would support root cause analysis.
Systems running Microsoft® Windows® experience a blue-screen trap when the OS crashes. When this

happens, Microsoft® recommends that system administrators perform an NMI event by temporarily shorting

the NMI header with a jumper. The NMI event enables a hung system to become responsive again.

Systems Insight Display LEDs

The HP Systems Insight Display LEDs represent the system board layout. The display provides status for all

internal LEDs and enables diagnosis with the access panel installed. To view the LEDs, access the HP Systems

Insight Display (on page

19

).

Item

Description

Status

1

Power cap LED

To determine Power cap status, see

"Systems Insight Display LED
combinations (on page

14

)."

2

NIC LEDs

Green = Network link exists.

Flashing green = Network link and

activity exist.
Off = No link to network exists.

If power is off, the front panel LED is not

active. For status, see "Rear panel LEDS
and buttons (on page

9

)."

3

AMP status

Green = AMP mode enabled

Amber = Failover

Flashing amber = Invalid configuration
Off = AMP mode disabled

All other LEDs

Amber = Failure

Off = Normal