HP ProLiant DL360 G7 Server - Manual (Page 57)

Hardware options installation 57
5. Install the cache module in the SAS cache module connector on the system board. For connector
locations, see "System board components (on page 10 )."
6. Install the PCI riser board assembly (on page 23 ).
7. Install the access panel (on page 20 ).
8. Slide the server into the rack.
9. Power up the server (on page 18 ).
Installing the BBWC battery pack or the FBWC capacitor pack
1. Power down the server (on page 18 ).
2. Extend the server from the rack (on page 18 ).
3. Remove the access panel (on page 20 ).
4. Remove the PCI riser board assembly (on page 22 ).
5. Install the cache module (" Installing the cache module " on page 56 ).
CAUTION: When connecting or disconnecting the capacitor pack cable, the connectors on the
cache module and cable are susceptible to damage. Avoid excessive force and use caution to
avoid damage to these connectors.
6. Install the BBWC battery pack or the FBWC capacitor pack.