HP ProLiant DL360 G7 Server - Manual (Page 37)

Hardware options installation 37
14. Remove the thermal interface media protective cover.
15. Install the heatsink.
16. Install the air baffle (on page 21 ).
17. If removed, install the BBWC battery pack or the FBWC capacitor pack (" Installing the BBWC battery
pack or the FBWC capacitor pack " on page 57 ).
18. Install the access panel (on page 20 ).
19. Slide the server into the rack.
20. Power up the server (on page 18 ).
Memory options
IMPORTANT: This server does not support mixing RDIMMs and UDIMMs. Attempting to mix
these two types causes the server to halt during BIOS initialization.