beautypg.com

Installing a redundant hot-plug power supply, Installing a redundant hot-plug power supply -36 – HP ProLiant DL585 Server User Manual

Page 87

background image

Installing hardware options

4-36

HP ProLiant DL585 Server User Guide



Installing a redundant hot-plug power supply

1. Remove the protective cover from the connector pins on the new redundant

power supply, if present.

2. Open the lever by pushing the lever release button upward.
3. Slide the power supply into the empty bay until it locks into place.
4. Close the locking lever.

Figure 4-36: Installing a redundant hot-plug power supply

5. For shipment or for optional added security, install the retaining screw, which

ships in a plastic bag with the power supply option kit. The pre-drilled hole for
the screw is located on the bottom of the server.

See also other documents in the category HP Computer hardware: