beautypg.com

Attaching the cable management arm to the server – HP ProLiant DL585 Server User Manual

Page 47

background image

Server setup

3-24

HP ProLiant DL585 Server User Guide



Attaching the cable management arm to the server

1. Loosen the thumbscrews on the front of the server to enable the server to slide

forward.

2. Align the keyholes on the cable management arm with the posts on the server,

and then secure with the thumbscrew.

Figure 3-19: Attaching the cable management arm to
the server

See also other documents in the category HP Computer hardware: