Connecting the power cord, Connecting the power cord -18 – HP ProLiant DL585 Server User Manual

Page 41

Text mode
Original mode

Server setup

3-18

HP ProLiant DL585 Server User Guide

Connecting the power cord

WARNING: To reduce the risk of electric shock or damage to the equipment:

•

Do not disable the power cord grounding plug. The grounding plug is an
important safety feature.

•

Plug the power cord into a grounded (earthed) electrical outlet that is easily
accessible at all times.

•

Do not route the power cord where it can be walked on or pinched by items
placed against it. Pay particular attention to the plug, electrical outlet, and the
point where the cord extends from the server.

1. Plug the power cord into the appropriate power supply AC power connector.

NOTE: The power connector for the primary power supply is inlet number one; the power
connector for the redundant hot-plug power supply is inlet number two.

Figure 3-13: Connecting the power cord