HP NetRAID 1Si Controller - Manual (Page 9)

3
1 Overview of HP NetRAID Utilities
Three HP NetRAID utilities can configure and manage HP NetRAID Series
subsystems. Integrated HP NetRAID controllers and HP NetRAID Series adapters
(HP NetRAID-1Si and HP NetRAID-3Si) use the same utilities. However, all
utilities are not available to all network operating systems.
•
HP NetRAID Assistant is used only with Microsoft Windows NT and
Windows 2000. (This utility is similar to the one that you ran from the
HP NetServer Navigator CD-ROM to initially configure your
HP NetRAID subsystem.)
•
HP NetRAID Config is a text-based RAID configuration utility that runs
under Novell NetWare, IBM OS/2, SCO OpenServer, and SCO UnixWare.
•
HP NetRAID Express Tools is a text-based RAID configuration utility
available to all operating systems. HP NetRAID Express Tools has some
advanced features not available in the other utilities.
Table 1-1. HP NetRAID Management Utilities and Network Operating Systems
Network Operating
System
HP NetRAID
Assistant
HP NetRAID
Config
HP NetRAID
Express Tools
Microsoft Windows 2000 X X
Microsoft Windows NT X X
Novell NetWare X X
IBM OS/2 X X
SCO OpenServer X X
SCO UnixWare X X
NOTE Consult the Hewlett-Packard World Wide Web site
(http://www.hp.com/go/netserver) or your local HP dealer for
compatibility of your adapter with the most current versions of
the network operating systems listed in the preceding table.