HP NetRAID 1Si Controller - Manual (Page 82)

Chapter 4 HP NetRAID Express Tools
76
•
Memory Type (for HP NetRAID-1Si)
•
Power Fail Safeguard Parameter (also available with HP NetRAID Config)
•
Read Modify Write Mode
•
Reset to Default Settings
•
SCSI-2 Command Tagging
•
SCSI Termination (for HP NetRAID-3Si and integrated HP NetRAID in
HP NetServer LH 3000/3000r, LH 6000/6000r, and LT 6000r; also
available with HP NetRAID Config)
•
SCSI Transfer Rate
•
Span
•
Synchronous Negotiation
•
View/Add/Delete Config (also available with HP NetRAID Config)
•
Virtual Sizing
This section describes the following topics:
A. Starting and Exiting HP NetRAID Express Tools
B. HP NetRAID Management Menu
C. Configuring Arrays and Logical Drives
D. Formatting Physical Drives
E. Changing the HP NetRAID Series Adapter
F. Swapping Physical Drives
A Starting and Exiting HP NetRAID Express Tools
To start HP NetRAID Express Tools
1. Log off all users, close all applications, and power down the HP NetServer.
2. Restart the HP NetServer.
3. When the following prompt appears, press <Ctrl> <M>.