HP Laserjet p3015 - Manual (Page 82)

Disable network protocols (optional)
By factory default, all supported network protocols are enabled. Disabling unused protocols has the
following benefits:
● Decreases product-generated network traffic
● Prevents unauthorized users from printing to the product
● Provides only pertinent information on the configuration page
● Allows the product control panel to display protocol-specific error and warning messages
Disable IPX/SPX, AppleTalk, or DLC/LLC
NOTE: Do not disable IPX/SPX in Windows-based systems that print through IPX/SPX.
1. Press the Menu button .
2. Open each of the following menus. Press the down arrow to highlight it and then press the OK
button to select it.
a. CONFIGURE DEVICE
b. I/O
c. EMBEDDED JETDIRECT MENU
d. IPX/SPX, APPLETALK, or DLC/LLC
e. ENABLE
f. OFF
3. Press the Menu button to return to the Ready state.
70 Chapter 5 Connectivity ENWW