HP Laserjet p3015 User Manual
Page 172
Control panel message
Description
Recommended action
USB ACCESSORY NEEDS TOO MUCH
POWER
Remove USB accessory and then turn off
then on
alternates with
USB ACCESSORY NEEDS TOO MUCH
POWER
For help press
The USB accessory is drawing too much
electrical current. Printing cannot continue.
Remove the USB accessory, and then restart
the product.
Use a USB accessory that uses less power
or that contains its own power supply.
USB accessory not recognized
For help press
alternates with
USB accessory not recognized
To clear press OK
The product does not support plug-and-play
operation for the type of USB accessory in the
host USB port, or the accessory is not
supported
With the USB accessory connected, turn the
product off and then on. If the message
reappears, remove the USB accessory.
USB printing unavailable
For help press
The administrator has disabled printing from
USB accessories.
Print the job from a computer that is
connected to the product.
USB storage accessory removed
Clearing any unassociated data
You have removed the USB accessory from
the product. The product cancels any jobs
from the accessory that are in the print queue.
To print the remaining jobs, reinsert the USB
accessory and select the jobs again.
USB STORAGE DEVICE FAILURE
To clear press OK
The specified device has failed.
Press the
OK
button to continue.
USB STORAGE FILE OPERATION FAILED
To clear press OK
A command attempted an illogical operation. Press the
OK
button to continue.
USE TRAY
To change press / .
To use press OK
The product did not detect the type and size
of paper requested. The message shows the
most likely type and size available and the
tray in which they are available.
Press the
OK
button to accept the values in
the message, or press the up or down arrow
/ to scroll through the available choices.
USED SUPPLY IN USE
Economode disabled
The print cartridge has been previously used. If you believe you purchased a genuine HP
supply, go to
.
USED SUPPLY INSTALLED
The print cartridge has been previously used. Press the
OK
button to use this cartridge, or
install a new cartridge.
If you believe you purchased a genuine HP
supply, go to
.
Table 10-1
Control-panel messages (continued)
160 Chapter 10 Solve problems
ENWW