HP Laserjet p3015 - Manual (Page 36)

Item Sub-item Sub-item Values Description
FUSER MODES A list of paper types
displays. NORMAL
HIGH2
HIGH1
LOW
LOW1
Each paper type has a default fuser
mode. Change the fuser mode only if you
are experiencing problems printing on
certain paper types. After you select a
type of paper, you can select a fuser mode
that is available for that type.
RESTORE MODES Return all fuser-mode settings to the
factory-default settings.
OPTIMIZE Optimize various print modes to solve
print-quality issues.
RESTORE OPTIMIZE Return all the settings in the OPTIMIZE
menu to the factory-default values.
RESOLUTION 300
600
FASTRES 1200*
PRORES 1200
Sets the resolution at which the product
prints.
300: Produces draft print quality.
600: Produces high print quality for text.
FASTRES 1200: Produces 1200-dpi print
quality for fast, high-quality printing of
business text and graphics.
PRORES 1200: Produces 1200-dpi print
quality for fast, high-quality printing of line
art and graphic images.
RET OFF
LIGHT
MEDIUM*
DARK
Use the Resolution Enhancement
technology (REt) setting to produce print
with smooth angles, curves, and edges.
REt does not affect print quality if the
resolution is set to the FASTRES 1200 or
PRORES 1200 settings. All other print
resolutions benefit from REt.
ECONOMODE OFF*
ON
EconoMode is a feature that allows the
product to use less toner per page.
Selecting this option extends the life of the
toner supply and might reduce the cost
per page. However, it also reduces print
quality. The printed page is adequate for
printing drafts.
HP does not recommend full-time use of
EconoMode. If EconoMode is used full-
time, the toner supply might outlast the
mechanical parts in the print cartridge. If
print quality begins to degrade under
these circumstances, you will need to
install a new print cartridge, even if there
is toner supply remaining in the cartridge.
TONER DENSITY 1 to 5 Lighten or darken the print on the page.
The lightest setting is 1, and the darkest
setting is 5. The default setting of 3 usually
produces the best results.
24 Chapter 2 Control panel ENWW