Replace supplies and parts, Supply replacement guidelines, Change the print cartridge – HP Laserjet p3015 User Manual

Page 134

Replace supplies and parts

Supply replacement guidelines

Keep the following guidelines in mind when setting up the product.

●

Provide enough space above and in the front of the product for removing supplies.

●

Place the product on a flat, sturdy surface.

Change the print cartridge

When a print cartridge reaches the end of its estimated useful life, the control panel displays a BLACK
CARTRIDGE VERY LOW message. You do not need to replace the supply at this time unless print
quality is no longer acceptable. When the supply has reached this condition, the HP premium protection
warranty for that supply has ended.

The cartridge-life remaining is an approximation only, and it varies depending on the types of documents
you print and other factors.

You can configure the product to stop when the BLACK CARTRIDGE VERY LOW message displays.
The print cartridge might still be able to produce acceptable print quality. To continue printing, either
replace the supply or use the MANAGE SUPPLIES menu to reconfigure the product to continue printing.
For more information, see

Manage supplies menu on page 20

CAUTION:

If toner gets on clothing, wipe it off with a dry cloth and wash the clothes in cold water. Hot

water sets toner into fabric.

NOTE:

Information about recycling used print cartridges is on the print-cartridge box. See

Return and

recycling instructions on page 218

TIP:

To see an animation of this procedure go to this Web site:

www.hp.com/go/ljp3010-replace-print-

cartridges