HP CM8000 Color Multifunction Printer series - Manual (Page 36)

Copy
You can scan original documents by using the document feeder or the scanner glass. The device has
several options available for customizing copied output.
Copy from the document feeder
The document feeder holds a maximum of 100 sheets of paper.
1. Place the original document face-up in the document feeder, with the top edge of the document
toward the rear of the document feeder or feeding first into the input slot. For two-sided originals,
place the first side of the original face-up.
NOTE: The document feeder beeps and illuminates a green light when an original is properly
loaded.
2. Adjust the paper guides so that they are touching the original document.
NOTE: Depending on how the system administrator has configured the device, you might need to sign
in.
NOTE: For the fastest performance when using Letter or A4-size paper, place the short edge of the
document toward the rear of the document feeder.
To make copies by using the default copy options, use the numeric keypad on the control panel to select
the number of copies, and press
Start . To use customized settings, touch Copy . Specify the settings,
and then press Start . For more information about using customized settings, see Adjust the copy settings
on page 31 .
NOTE: You can use either the hard Start button on the control panel or the Start Copy button on the
touchscreen.
Retrieve the original document from the output bin that is under the document feeder input-tray. Retrieve
the copies from the output bin that is on the left side of the device.
28 Chapter 2 Use the device ENWW