HP Compaq Integrated Smart Array Controller - Manual (Page 85)

Compaq Array Configuration Utility 6-17
Compaq Confidential – Need to Know Required
Writer: CDresden Project: Compaq Integrated Smart Array Controller User Guide Comments:
Part Number: 153236-001 File Name: g-ch6 Compaq Array Configuration Utility.doc Last Saved On: 8/27/99 11:25 AM
Drive Rebuild, Expand Priority
and Accelerator Ratio
To set the drive rebuild priority, expand priority, or accelerator ratio for a
controller, highlight the controller at the main configuration screen and select
the Controller Settings option listed below Controller Options.
Figure 6-14. NetWare Controller Settings screen
NOTE: The figures in this section represent typical NetWare screen displays. Different
versions of the software may present slightly different server displays.
Drive Rebuild
Drive rebuild is required after a physical drive fails and is replaced. Only
logical drives configured for a fault-tolerance level (RAID 5, RAID 1,
RAID 0+1, or RAID 0) on the array with the failed physical drive can be
rebuilt.