HP Compaq Integrated Smart Array Controller - Manual (Page 80)

6-12 Compaq Integrated Smart Array Controller User Guide
Compaq Confidential – Need to Know Required
Writer: CDresden Project: Compaq Integrated Smart Array Controller User Guide Comments:
Part Number: 153236-001 File Name: g-ch6 Compaq Array Configuration Utility.doc Last Saved On: 8/27/99 11:25 AM
Create Logical Drive Screen
From the Create Logical Drive screen, you can select the fault-tolerance
method, enable or disable the array accelerator, set the logical drive size, and
set the stripe size.
The Integrated Smart Array Controller supports four fault-tolerance levels:
■ RAID 5
■ RAID 1
■ RAID 0+1
■ RAID 0
The Fault Tolerance frame allows you to select the appropriate RAID level.
Figure 6-10. Create Logical Drive screen
The Logical Drive Size area shows a scale marked with the amount of drive
capacity available for the logical drive selected from the main configuration
screen. The utility does not allow you to create a logical drive larger than the
maximum supported by the operating system.