HP Compaq Integrated Smart Array Controller - Manual (Page 30)

3-2 Compaq Integrated Smart Array Controller User Guide
Compaq Confidential – Need to Know Required
Writer: CDresden Project: Compaq Integrated Smart Array Controller User Guide Comments:
Part Number: 153236-001 File Name: d-ch3 Updating Firmware.doc Last Saved On: 8/26/99 3:33 PM
ROMPaq Diskettes
The latest version of ROMPaq is stored on the SmartStart and Support
Software CD and should be used to create the diskettes for ROMPaq utilities
to support the Integrated Smart Array Controller.
The latest ROMPaqs may also be downloaded from the Compaq website:
http://www.compaq.com
At the website, locate your software in the Support area.
Materials Needed
Use the following items to create ROMPaq utility diskettes:
■ Compaq SmartStart and Support Software CD
■ 3 to 5 blank diskettes for System ROMPaq or 10 to 15 blank diskettes
for Options ROMPaq
■ Access to a server or workstation with a bootable CD-ROM drive or any
system running in a Microsoft Windows-based environment that has an
installed CD-ROM drive. This may be the system in which you are
installing the Integrated Smart Array Controller.
Creating Diskettes
Use the following procedure to create ROMPaq diskettes:
1. Open SmartStart either of the following ways:
G Boot the server from the Compaq SmartStart and Support Software
CD. In Windows, the Diskette Builder utility loads automatically.
G Run Diskette Builder from any Windows-based PC.
NOTE: It is not necessary to perform a SmartStart installation. Select Diskette Builder and
disregard any screen prompts to perform a full installation.
2. From the Compaq Diskette Builder screen, select Create Software
Diskettes from CD Only.