HP Lights-Out 100 Remote Management - Manual (Page 21)

Unsupported Command message. The following examples are all valid ways to call help
for a verb.
– /./-> help show
Usage:
show [][][]
– /./-> show -h
Usage:
show [][][]
– /./-> show -help
Usage:
show [][][]
– /./->
◦
Help for targets
Calling help for a target returns any information about the target and its contents. You
can call help for any target that is not contained in the current directory (help map1
can be called from system1).
– /./-> system1 -h
Invalid command
– /./-> system1 -help
Invalid command
– /./-> help system1
Host System Directory
– /./-> help map1
Management Service Processor Directory
– /./-> cd system1
– /./system1/-> help map1
Management Service Processor Directory
◦
Help for properties
Calling help for a property or any other option for which there is no help information
returns an Unsupported Command or Invalid command message. For example:
/./system1/-> show
/./system1
Targets
oemhp_sensors
oemhp_frus
log1
led1
console 1
Properties
name=Hewlett-Packard
enabledstate=enabled
Verbs
cd
version
exit
Using CLP 21