HP Insight Online Software - Manual (Page 6)

Chapter 2: Sign in and complete device
registration
To use the various feature services of Insight Online you must sign in using your HP Passport ID. You can
then complete device registration if needed. Successful device registration assumes you have done the
following:
l
For devices that use the central connect method, you have correctly installed and configured Insight
RS, and specified your HP Authorized Channel Partners in the Hosting Device Setup Wizard.
l
For devices that use the direct connect method, you have registered using the iLO or OA interface, and
completed the registration process in Insight Online. The registration process in Insight Online includes
specifying HP Authorized Channel Partners. See
Complete direct connect device registration .
Detailed information about setting up these devices is available in the HP Insight Remote Support and
Insight Online Setup Guide for ProLiant Gen8 Servers and BladeSystem c-Class Enclosures
(
http://www.hp.com/go/insightremotesupport/docs ).
Another user in your company may have completed this registration process, and shared the contract and
warranties or devices with you. In that case you can simply sign in to Insight Online using your HP
Passport ID and see the devices.
To create the link to your devices, sign in to Insight Online through the HP Support Center
(
http://www.hp.com/go/hpsc ), using your HP Passport ID and password as shown in the figures below :
Figure 2.1 Sign in to the HP Support Center
Page 6 of 51 HP Insight Online: User's Guide