HP NonStop G-Series - Manual (Page 90)

Formatting Reports and Plots
Measure User’s Guide — 520560-003
4- 30
Plotting Execution Modes
These commands generate the plot shown in Example 4-19 . The pound sign (#)
represents TNS/R native code.
85+ ADD PLOT TNSR-BUSY-SAMPLES
86+ SET PLOT TIME-BASE OFF
87+ LIST PLOT
Example 4-18. Plotting Execution Modes—TNS and Accelerated Code Samples
0:::::+:::20.0:::::+:::40.0:::::+:::60.0:::::+:::80.0:::::+:::100
A *************************++++++++++++++++++| -
B ********************************++| -
C *******************************************************+++++++++-
D +++++++++++++++| -
E +| -
F +++++++++++++++++++++++++++++++++++| -
0:::::+:::20.0:::::+:::40.0:::::+:::60.0:::::+:::80.0:::::+:::100
MIN VALUE = 2.000 MAX VALUE = 88.000
A: FORMAT Processh $SYSTEM.SYS02.MEASCOM (7,37)
B: PRINT^RESULT Processh $SYSTEM.SYS02.MEASCOM (7,37)
C: FINDT Processh $SYSTEM.SYS02.MEASCOM (7,37)
D: FORMAT Processh $SYSTEM.SYS02.MEASCOM (7,37)
(TNS)
E: PRINT^RESULT Processh $SYSTEM.SYS02.MEASCOM (7,37)
(TNS)
F: FINDT Processh $SYSTEM.SYS02.MEASCOM (7,37)
(TNS)
Example 4-19. Plotting Execution Modes—TNS/R Native Code Samples
0:::::+:::20.0:::::+:::40.0:::::+:::60.0:::::+:::80.0:::::+:::100
A ########################################| -
B ################################| -
C ######| -
0:::::+:::20.0:::::+:::40.0:::::+:::60.0:::::+:::80.0:::::+:::100
MIN VALUE = 2.000 MAX VALUE = 65.000
A: AC1^CKPT^GET^BLOCK Processh $SYSTEM.SYS02.TSYSDP2 (7,20)
(TNSR)
B: AC1^RECMOVE^DATA Processh $SYSTEM.SYS02.TSYSDP2 (7,20)
(TNSR)
C: AC1^REDOCHAIN^PURGE Processh $SYSTEM.SYS02.TSYSDP2 (7,20)
(TNSR)