HP NonStop G-Series - Manual (Page 30)

Measure Command Interface (MEASCOM)
Measure User’s Guide — 520560-003
2 -2
Command-Language Format
Table 2-1 summarizes all MEASCOM commands. Most of these commands are
described, with examples of their use, in Sections 3 through 5 of this manual. For
complete descriptions of all commands, see the Measure Reference Manual.
Table 2-1. MEASCOM Commands (page 1 of 3)
Command Object Function
Controlling the Subsystem
START MEASSUBSYS Starts the Measure subsystem.
STATUS MEASSUBSYS Displays information about the Measure
subsystem.
STOP MEASSUBSYS Stops the Measure subsystem.
Configuring Measurements
ADD COUNTER Specifies a user-defined counter for measurement.
ADD entity-type Selects an entity for measurement.
DELETE COUNTER Deletes a user-defined counter from a
measurement configuration.
DELETE entity-type Deletes an entity from a measurement
configuration.
INFO COUNTER Displays information about user-defined counters.
INFO entity-type Displays entities selected for measurement.
Controlling Measurements
START MEASUREMENT Starts a measurement.
STATUS MEASUREMENT Displays information about a measurement.
STOP MEASUREMENT Stops a measurement.
Selecting and Displaying Data
ADD MEASUREMENT Selects a data file for examination.
DELETE MEASUREMENT Deletes a data file from those selected for
examination.
INFO MEASUREMENT Displays information about a data file.
LIST entity-type Displays a report on a selected entity.
LISTACTIVE entity-type Displays a report on an entity being measured.
LISTALL entity-type Displays a report on an entity by interval records.
RESET REPORT Returns format options for data displays to default
values.
SET REPORT Sets format options for data displays.
SHOW REPORT Displays format options for data displays.
Plotting Data
ADD PLOT Selects a counter for plotting.
DELETE PLOT Deletes a counter from those selected for plotting.