HP NonStop G-Series - Manual (Page 62)

Formatting Reports and Plots
Measure User’s Guide — 520560-003
4 -2
REPORT Attributes
To display the current settings of REPORT attributes, use the SHOW REPORT
command. For example, to display the setting for the REPORT TOTALS attribute:
5+ SHOW REPORT TOTALS
Set Report Totals suppress
To display all REPORT attributes:
6+ SHOW REPORT *
Set Report Dots off
Set Report Format normal
Set Report Rate on
Set Report Style legacy
Set Report Totals suppress
Set Report Zero-Values suppress
Set Report Zero-Reports suppress
Set Report From
Set Report To
Set Report For
Set Report LoadId
Set Report Style legacy
Set Report Dots off
These values are the initial defaults for the REPORT attributes. They are used for all
reports unless you set new values or specify different attributes in the LIST
entity-type , LISTALL entity-type , or LISTACTIVE entity-type commands.
For a summary or these attributes, see Table 4-1 on page 4-3. For detailed
descriptions, see the Measure Reference Manual.
Setting Report Attributes
To set the REPORT attributes in MEASCOM, use the SET REPORT command. For
example, to set the default FORMAT attribute to BRIEF and verify it with the SHOW
command:
7+ SET REPORT FORMAT BRIEF
8+ SHOW REPORT FORMAT
Set Report Format brief
Unless you specify a different FORMAT attribute in a LIST entity-type , LISTALL
entity-type , or LISTACTIVE entity-type command or set or reset this attribute,
all subsequent reports of data from this data file appear in BRIEF format.
You can set several REPORT attributes in the same command. For example:
9+ SET REPORT TOTALS INCLUDE, ZERO-VALUES INCLUDE, RATE OFF
10+ SHOW REPORT *
Set Report Dots off
Set Report Format brief
Set Report Rate off
Set Report Style legacy
Set Report Totals include
Set Report Zero-Values include
Set Report Zero-Reports include