HP NonStop G-Series - Manual (Page 88)

Formatting Reports and Plots
Measure User’s Guide — 520560-003
4- 28
Plotting Execution Modes
Plotting Execution Modes
Reports for the PROCESSH (process histogram) entity type show what percentage of
code samples executed in each of three execution modes:
•
TNS mode
•
Accelerated mode
•
TNS/R native mode
Example 4-16 shows a PROCESSH report for a process that runs in both the TNS and
accelerated modes.
Example 4-17 on page 4-29 shows a PROCESSH report for a process that runs in
TNS/R native mode.
Example 4-15. Five Busiest CPUs, One-Hour Time Window
73+ LIST PLOT, FROM 11:00, TO 12:00
0:::::+:::20.0:::::+:::40.0:::::+:::60.0:::::+:::80.0:::::+::::100
11:20:00 - E D C B A -
11:50:00 - E C D A B -
0:::::+:::20.0:::::+:::40.0:::::+:::60.0:::::+:::80.0:::::+::::100
Min value = 23.915 Max value = 74.388
A: CPU-BUSY-TIME Cpu 3
B: CPU-BUSY-TIME Cpu 1
C: CPU-BUSY-TIME Cpu 2
D: CPU-BUSY-TIME Cpu 10
E: CPU-BUSY-TIME Cpu 4
Example 4-16. Typical PROCESSH Report Showing TNS and Accelerated Modes
Process Program $SYSTEM.SYS02.MEASCOM
CPU 7 Pin 37 Priority 140 Userid 2,63 Creatorid 255,255
Local System \HOME From 17 Aug 1996, 16:51:00 For 45.6 seconds
Total Samples for the process = 786 #
Code-Map UC.0 Samples 257 # 32.69 %
Samples in Percent
Code-Range Name Accel TNS Code-Map of Total
-------------------------- --------- --------- ------------ -----------
FORMAT 40 # 25 # 65 # 8.26 %
PRINT^RESULTS 50 # 2 # 52 # 6.62 %
FINDT 85 # 55 # 140 # 17.81 %