HP Integrity rx2660 Servers - Manual (Page 9)

Introduction 9
• gawk 3.1.0-3 or later
• sed 3.02-10 or later
• pciutils-2.1.8-25.i386.rpm or later
To successfully deploy HP SUM on remote target systems based on a Linux operating system, the
following must be available:
• tcl-8.x package
• expect-5.x package
Starting with Linux PSP 8.40 and later, ensure the following platform-specific compatibility libraries are
also installed.
• For Red Hat Enterprise Linux 4x86 servers:
o compat-libstdc++-296-2.96-132.7.2.i386 or later
o lm_sensors-2.8.7-2.i386 or later
o net-snmp-5.1.2-11.i386 or later
o perl (required to provide the libperl.so)
o libnl (required for QLogic and Emulex drivers)
• For Red Hat Enterprise Linux 4 AMD64/EM64T servers:
o compat-libstdc++-296-2.96-132.7.2.i386 or later
o lm_sensors-2.8.7-2.x86_64 or later
o net-snmp-5.1.2-11.x86_64 or later
o perl (required to provide the libperl.so)
o libnl (required for QLogic and Emulex drivers)
• For Red Hat Enterprise Linux 5 x86 servers:
o compat-libstdc++-2.96-2.96-132.7.2.i386 or later
o lm_sensors-2...7-2.i386 or later
o net-snmp-5.3.1-14.e15.i386 or later
o perl (required to provide the libperl.so)
o libnl (required for QLogic and Emulex drivers)
• For Red Hat Enterprise Linux 5 AMD64/EM64T servers:
o compat-libstdc++-296-2.96-132.7.2.i386 or later
o lm_sensors-2.8.7-2.x86_64 or later
o net-snmp-5.3.1-14.e15.x86_64 or later
o perl (required to provide the libperl.so)
o libnl (required for QLogic and Emulex drivers)
• For SLES 10 x86 servers:
o compat-2006.1.25-11.2.i586 or later
o compat-libstdc++-5.0.7-22.2.i586 or later
o perl (required to provide the libperl.so)
o libnl (required for QLogic and Emulex drivers)