HP Integrity rx2660 Servers - Manual (Page 81)

Scripted deployment 81
Parameter Description Possible values
health application loads. (Applies to Linux PSP
only.)
management driver)
• NO (do not start the
HP Lights-Out
management driver)
HPVCAVCRMSERVER This parameter informs the VCA of the name of
the VCRM to use as a software distribution
repository. (Applies to Linux PSP only.)
VCRM name
HPVCAVCRMLOGINID This parameter is the login ID that the VCA uses
to communicate with the VCRM. (Applies to
Linux PSP only.)
VCA login ID
HPVCAVCRMLOGINPASSWD This parameter is the password for the login ID
specified in the HPVCAVCRMLOGIN parameter.
(Applies to Linux PSP only.)
VCA login password
FORCE-OVERWRITE This parameter is used by the HP Systems
Management Homepage (hpsmh) to force
overwrite the SMH settings of an existing
configuration file.
YES, NO (default)
ADMIN-GROUP This parameter is used by the HP Systems
Management Homepage (hpsmh) to set up
security for the web server. (Applies to Linux PSP
only.)
Up to five Linux groups,
separated by spaces or
semicolons, to enable
administrative access to
the web services.
USER-GROUP This parameter is used by the HP Systems
Management Homepage to set up security for
the web server. (Applies to Linux PSP only.)
Up to five Linux groups,
separated by spaces or
semicolons, to enable
user-level access to the
web servers.
OPERATOR-GROUP This parameter is used by the HP Systems
Management Homepage to set up security for
the web server. (Applies to Linux PSP only.)
Up to five Linux groups,
separated by spaces or
semicolons, to enable
operator-level access to
the web servers.
ANONYMOUS-ACCESS This parameter determines whether an
anonymous user can access the HP Systems
Management Homepage. (Applies to Linux PSP
only.)
YES, NO (default)
IP-BINDING This parameter is used by the HP Systems
Management Homepage to determine whether
hpsmh can use all available NICs and detect
subnets for its web services. (Applies to Linux
PSP only.)
YES, NO (default)
IP-BINDING-LIST This parameter is used by the HP Systems
Management Homepage to restrict the NICs and
subnets to use for its web servers.
The IP-BINDING parameter must be set to yes
for this parameter to be used during installation.
(Applies to Linux PSP only.)
IP address/NetMask
pairs separated by
semicolons (for example,
10.1.1.1/255.255.255.
0;10.2.2.2/255.255.25
5.0)
IP-RESTRICTED-LOGINS This parameter is used by the HP Systems
Management Homepage to restrict login access.
(Applies to Linux PSP only.)
YES, NO (default)
To enable restrictions on
who can log in to the