HP Integrity rx2660 Servers - Manual (Page 79)

Scripted deployment 79
Parameter Description Possible values
apply to Integrity Servers.
USEPROXYSCRIPT This parameter enables the inclusion of a proxy
script to access the HP FTP site
( ftp://ftp.hp.com ). This parameter does not
apply to Integrity Servers.
Web URL (for example,
autoproxy.com)
DELETEINPUTFILE This parameter enables you to instruct HP SUM
to delete the input file after it has been read in.
YES, NO (default)
ONFAILEDDEPENDENCY This parameter instructs HP SUM how to proceed
when a component has a failed dependency.
The default of OmitHost causes the host to be
put in a failure state and no install is attempted
on it.
OmitComponent clears the affected
components and proceeds with any updates that
do not have dependency failures. Force attempts
all updates, even if they have dependency
failures.
OmitHost (default),
OmitComponent, Force
HOST This parameter is the IP address or the DNS
name of a remote server, remote iLO NIC port,
Virtual Connect Ethernet or Fibre Channel
Module for c-Class BladeSystem, or BladeSystem
Onboard Administrator.
When two Onboard Administrators are in an
enclosure, this parameter is the active Onboard
Administrator. When specifying the IP address,
you can use either the IPv4 or IPv6 format.
This parameter specifies an already defined
group name in the HP SUM GUI.
IP address, DNS name
UID This parameter enables you to log in to the
target hosts with your user ID.
PWD This parameter enables you to use the password
for the user ID specified in the UID.
The password is used to log in to target hosts.
LOGFILENAME This parameter enables you to set the name of
the log file generated by HP SUM to something
other than the default of
/var/log/hppldu.log. The path must
already exist or the log file remains the default
file name.
Log file name
CMALOCALHOSTRWCOMMST
R
This parameter enables you to specify an SNMP
read/write community string for local host
access. (Applies to Linux PSP only.)
SNMP read/write
community string
CMALOCALHOSTROCOMMST
R
This parameter enables you to specify an SNMP
read-only community string for local host access.
(Applies to Linux PSP only.)
SNMP read-only
community string
CMAMGMTSTATIONRWIPOR
DNS
This parameter enables you to specify the IP
address or DNS host name of a system with
read/write access to serve as a management
station. You can specify multiple locations
separated by a space. (Applies to Linux PSP
IP address, DNS name