HP Integrity rx2660 Servers - Manual (Page 78)

Scripted deployment 78
Parameter Description Possible values
OPTIONS This parameter can be used to specify the HP
SUM CLI options inside the input file, which
overrides the configuration settings. Parameters
can be separated by a semi-colon, comma, or a
space.
This parameter replaces the LSPOPTIONS
parameter that was previously supported with
LDU.
One or more CLI switch
USESNMP This parameter specifies that components, which
use SNMP protocol, are available to be selected
for installation.
These components are available for selection by
default. When the /usesnmp parameter is used,
and the /usewmi parameter is not used, the
WMI components are optional. This parameter
does not apply to HP Integrity Servers.
YES, NO
USEWMI This parameter specifies that components, which
use WMI protocol, are available to be selected
for installation.
These components are optional by default and
are not installed unless this parameter is used.
When the /usewmi parameter is used, and the
/usesnmp parameter is not used, the SNMP
components are optional. This parameter does
not apply to HP Integrity Servers.
YES, NO
ROMONLY This parameter is a filter switch and allows the
user to view only the firmware components
required for installation.
Do not use the /romonly parameter with the
/softwareonly parameter.
YES, NO
SOFTWAREONLY This parameter is a filter switch and allows the
user to view only the software components
required for installation.
Do not use the /softwareonly parameter with
the /romonly parameter.
YES, NO
USECURRENTCREDENTIAL This parameter enables the credentials of the
local host to be used as the credentials to access
the targets instead of providing the username
and password explicitly for each target.
The assumption is that the current credentials are
valid for the targets being accessed. (Applies to
Windows® operating systems only.)
YES, NO
WEBUPDATENEEDED This parameter enables you to instruct HP SUM
to include the components from the HP FTP site
( ftp://ftp.hp.com ) in the list of possible updates.
This parameter does not apply to Integrity
Servers.
YES, NO
USEPROXYSERVER This parameter enables the inclusion of a proxy
server (and port number) to access the HP FTP
site (
ftp://ftp.hp.com ). This parameter does not
String value
For example,
11.22.33.44:80