HP StorageWorks Modular Arrays - Manual (Page 61)

Using the LPUTILNT Utility/NT 6-3
Compaq Confidential – Need to Know Required
Writer: Bill Reitz Project: Compaq StorageWorks 64-Bit PCI-To-Fibre Channel Host Bus Adapter User Guide Comments:
Part Number: AA-RKPDA-TE 173941-001 File Name: G-CH6 USING LPUTILNT UTILITY.DOC Last Saved On: 12/8/99 11:01 AM
■ Loop Map – View a list of the members of the selected HBA’s loop
map.
■ PCI Registers – View the values of the PCI configuration registers for
the selected HBA.
■ Configuration Data – View information about the data in each of the
configuration regions in the flash ROM of the selected HBA. You can
also download PCI configuration data files.
■ Drive Parameters – View information about device driver parameters
that are maintained in the Windows/NT registry.
■ Link Statistics – View statistics about the arbitrated loop of the selected
HBA.
■ Status and Counters – View status and counters for bytes, frames,
sequences, exchanges, etc.
Performing HBA Firmware Maintenance
From the LPUTILNT Utility/NT Main menu screen:
1. Select the desired HBA.
2. Expand the category list and select Firmware Maintenance.
This display provides detailed information about the firmware in the flash
ROM of the selected HBA. The radio buttons determine how the following
data is displayed (see Figure 6-2):
■ Flash ROM List – Shows all firmware images in the selected HBA’s
flash ROM.
■ Flash ROM Map – Displays these same images, along with unused flash
ROM storage space.
■ RAM Map – Displays the firmware images currently loaded in the
selected HBA’s SRAM.