HP StorageWorks Modular Arrays - Manual (Page 43)

Troubleshooting 4-13
Compaq Confidential – Need to Know Required
Writer: Bill Reitz Project: Compaq StorageWorks 64-Bit PCI-To-Fibre Channel Host Bus Adapter User Guide Comments:
Part Number: AA-RKPDA-TE 173941-001 File Name: E-CH4 TROUBLESHOOTING.DOCe-ch4 Troubleshooting.doc Last Saved On: 12/22/99 10:10
AM12/20/99 6:07 PM
Table 4-5
Current Private Loop Device Mapping
continued
Bus #
0 Target#
0-31 Lun#
0-7 *AL_PA
None *SEL_ID
None **AL_PA
None **SEL_ID
None
3***
0 0-7 0x73 0x3F 0x74 0x3E
1 0-7 0x74 0x3E 0x73 0x3F
2 0-7 0x75 0x3D 0x72 0x40
3 0-7 0x76 0x3C 0x71 0x41
4 0-7 0x79 0x3B 0x6E 0x42
5 0-7 0x7A 0x3A 0x6D 0x43
6 0-7 0x7C 0x39 0x6C 0x44
7 0-7 0x80 0x38 0x6B 0x45
8 0-7 0x81 0x37 0x6A 0x46
9 0-7 0x82 0x36 0x69 0x47
10 0-7 0x84 0x35 0x67 0x48
11 0-7 0x88 0x34 0x66 0x49
12 0-7 0x8F 0x33 0x65 0x4A
13 0-7 0x90 0x32 0x63 0x4B
14 0-7 0x97 0x31 0x5C 0x4C
15 0-7 0x98 0x30 0x5A 0x4D
16 0-7 0x9B 0x2F 0x59 0x4E
17 0-7 0x9D 0x2E 0x56 0x4F
18 0-7 0x9E 0x2D 0x55 0x50
19 0-7 0x9F 0x2C 0x54 0x51
* Use this translation if registry ScanDown = 0 (default)
** Use this translation if registry ScanDown = 1
*** If MapBus0=1;, then device addressing starts with Bus #0, not #1
continued