Diagnostics main menu – HP StorageWorks Modular Arrays User Manual
Page 54
5-6 Compaq StorageWorks 64-Bit PCI-To-Fibre Channel Host Bus Adapter User Guide
Compaq Confidential – Need to Know Required
Writer: Bill Reitz Project: Compaq StorageWorks 64-Bit PCI-To-Fibre Channel Host Bus Adapter User Guide Comments:
Part Number: AA-RKPDA-TE 173941-001 File Name:
F-CH5 FIRMWARE AND DIAGNOSTIC UTILITY.DOCf-ch5 Firmware and Diagnostic Utility.doc
Last
Saved On:
12/28/99 8:56 AM12/21/99 11:52 AM
Diagnostics Main Menu
After the diagnostic and firmware download utility goes through its start-up
procedure, the Main menu displays and handles user requests. If the program
detects two or more HBAs in the system, you are prompted to select which
HBA(s) is to be tested.
The function of each option on the Main menu is listed in Table 5-2.
Table 5-2
I386DNLD.EXE Main Menu Options
Menu Selection
Description
Test Host Adapters
Runs host-based internal and external loopback tests.
Modify Test Options
Enables you to disable or enable up to seven different tests,
depending upon the cards installed (BIU-1 or BIU-2). Specify
number of retries and actions to take if error occurs.
Restart Host Adapters
Resets the HBA.
Input/Output
Opens or closes input and output files.
Maintenance
Updates firmware or non-volatile parameters in FLASH ROM.
Display program images stored in memory.
Show Host Adapters
Info
Displays configuration and status data used by Tech Support.
Quit
Exits I386DNLD.EXE.
NOTE: Enter 0 at the Option prompt to display the previous menu. All values are in
hexadecimal.
The menu options and descriptions are described in the following sections.