HP StorageWorks Modular Arrays - Manual (Page 41)

Troubleshooting 4-11
Compaq Confidential – Need to Know Required
Writer: Bill Reitz Project: Compaq StorageWorks 64-Bit PCI-To-Fibre Channel Host Bus Adapter User Guide Comments:
Part Number: AA-RKPDA-TE 173941-001 File Name: E-CH4 TROUBLESHOOTING.DOCe-ch4 Troubleshooting.doc Last Saved On: 12/22/99 10:10
AM12/20/99 6:07 PM
Table 4-5
Current Private Loop Device Mapping
continued
Bus #
0 Target#
0-31 Lun#
0-7 *AL_PA
None *SEL_ID
None **AL_PA
None **SEL_ID
None
27 0-7 0x36 0x62 0xB9 0x1B
28 0-7 0x37 0x61 0xB6 0x1C
29 0-7 0x3A 0x60 0xB5 0x1D
30 0-7 0x3C 0x5F 0xB4 0x1E
31 0-7 None None None None
2***
0 0-7 0x43 0x5E 0xB3 0x1F
1 0-7 0x45 0x5D 0xB2 0x20
2 0-7 0x46 0x5C 0xB1 0x21
3 0-7 0x47 0x5B 0xAE 0x22
4 0-7 0x49 0x5A 0xAD 0x23
5 0-7 0x4A 0x59 0xAC 0x24
6 0-7 0x4B 0x58 0xAB 0x25
7 0-7 0x4C 0x57 0xAA 0x26
8 0-7 0x4D 0x56 0xA9 0x27
9 0-7 0x4E 0x55 0xA7 0x28
10 0-7 0x51 0x54 0xA6 0x29
11 0-7 0x52 0x53 0xA5 0x2A
12 0-7 0x53 0x52 0xA3 0x2B
13 0-7 0x54 0x51 0x9F 0x2C
14 0-7 0x55 0x50 0x9E 0x2D
* Use this translation if registry ScanDown = 0 (default)
** Use this translation if registry ScanDown = 1
*** If MapBus0=1;, then device addressing starts with Bus #0, not #1
continued