HP StorageWorks Modular Arrays - Manual (Page 45)

Troubleshooting 4-15
Compaq Confidential – Need to Know Required
Writer: Bill Reitz Project: Compaq StorageWorks 64-Bit PCI-To-Fibre Channel Host Bus Adapter User Guide Comments:
Part Number: AA-RKPDA-TE 173941-001 File Name: E-CH4 TROUBLESHOOTING.DOCe-ch4 Troubleshooting.doc Last Saved On: 12/22/99 10:10
AM12/20/99 6:07 PM
Table 4-5
Current Private Loop Device Mapping
continued
Bus #
0 Target#
0-31 Lun#
0-7 *AL_PA
None *SEL_ID
None **AL_PA
None **SEL_ID
None
6 0-7 0xBA 0x1A 0x35 0x63
7 0-7 0xBC 0x19 0x34 0x64
8 0-7 0xC3 0x18 0x33 0x65
9 0-7 0xC5 0x17 0x32 0x66
10 0-7 0xC6 0x16 0x31 0x67
11 0-7 0xC7 0x15 0x2E 0x68
12 0-7 0xC9 0x14 0x2D 0x69
13 0-7 0xCA 0x13 0x2C 0x6A
14 0-7 0xCB 0x12 0x2B 0x6B
15 0-7 0xCC 0x11 0x2A 0x6C
16 0-7 0xCD 0x10 0x29 0x6D
17 0-7 0xCE 0x0F 0x27 0x6E
18 0-7 0xD1 0x0E 0x26 0x6F
19 0-7 0xD2 0x0D 0x25 0x70
20 0-7 0xD3 0x0C 0x23 0x71
21 0-7 0xD4 0x0B 0x1F 0x72
22 0-7 0xD5 0x0A 0x1E 0x73
23 0-7 0xD6 0x09 0x1D 0x74
24 0-7 0xD9 0x08 0x1B 0x75
25 0-7 0xDA 0x07 0x18 0x76
* Use this translation if registry ScanDown = 0 (default)
** Use this translation if registry ScanDown = 1
*** If MapBus0=1;, then device addressing starts with Bus #0, not #1
continued