Installing the windows nt scsi device driver – HP StorageWorks Modular Arrays User Manual
Page 24
3-2 Compaq StorageWorks 64-Bit PCI-To-Fibre Channel Host Bus Adapter User Guide
Compaq Confidential – Need to Know Required
Writer: Bill Reitz Project: Compaq StorageWorks 64-Bit PCI-To-Fibre Channel Host Bus Adapter User Guide Comments:
Part Number: AA-RKPDA-TE 173941-001 File Name: D-CH3 DEVICE DRIVER INSTALLATION.DOC Last Saved On: 12/8/99 10:52 AM
Installing the Windows NT SCSI Device
Driver
This section contains the steps for installing the Windows NT SCSI device
driver on a Windows NT server.
The software kit that is included with the HBA contains the latest version of he
HBA’s files at the time of shipment. Software files are updated periodically
and can be obtained from the Compaq website:
http://www.compaq.com/products/storageworks/adapters.html
Drill down through Services and Support to Adapter Support.
IMPORTANT: The ideal device driver installation includes the possession of a valid
operating system backup.
Following are the steps for installing the Windows NT SCSI device driver and
registry parameters for the first time.
From the Windows NT desktop:
1.
Click on Start, select Settings, and then Control Panel.
2.
Double click on the SCSI Adapters icon.
3.
Select the Drivers tab
4.
Click Add.
5.
Click Have Disk.
6.
Type in the path to the Windows NT SCSI device driver and then click
OK.
7.
Select the fibre channel SCSI driver and then click OK.
8.
Click Install and continue to install the driver.
9.
Reboot the computer to restart Windows NT.