Verifying the device driver installation, Removing the device driver – HP StorageWorks Modular Arrays User Manual
Page 25
Device Driver Installation 3-3
Compaq Confidential – Need to Know Required
Writer: Bill Reitz Project: Compaq StorageWorks 64-Bit PCI-To-Fibre Channel Host Bus Adapter User Guide Comments:
Part Number: AA-RKPDA-TE 173941-001 File Name: D-CH3 DEVICE DRIVER INSTALLATION.DOC Last Saved On: 12/8/99 10:52 AM
Verifying the Device Driver Installation
Verify the driver installation from the Windows NT desktop:
1.
Click Start, select Settings, and then Control Panel.
2.
Double click the SCSI Adapters icon.
3.
Select the Drivers tab.
Verify that the Emulex SCSI mini-port driver is present and started.
4.
Select the Default tab.
Verify that the HBA is present.
5.
Click the + symbol to expand the adapter list.
Verify that the connected storage device is listed.
Removing the Device Driver
To remove the device driver from the Windows NT desktop:
1.
Click Start, select Settings, and then Control Panel.
2.
Double click the SCSI Adapters icon.
3.
Select the Drivers tab.
4.
Click Remove.
5.
Select Yes to confirm.
6.
Click OK.
7.
Reboot the computer to restart Windows NT.