HP NonStop G-Series - Manual (Page 91)

N1524A ACL Installation and User’s Guide for the NonStop S-Series Tape Enclosure — 527340-001
A- 1
A
Troubleshooting
Fault Screen
When a fault is detected, a screen similar to Figure A-1 appears. At the same time,
either the Drive Fault or the Loader Fault LED is illuminated.
The first line in the Fault Screen shows a numerical Fault Symptom Code (FSC). The
second line shows a brief description of the error in place of the words 'Error
Description.' The third and fourth lines will contain a one- or two-line message
describing the initial Error Recovery Procedure (ERP).
Displaying Error Logs
To display the error history of the tape drive, use the Show History menu:
1. At the Default screen, press Enter to enter the Menu mode. The Main menu
appears.
2. At the Main menu, press the down button five times until the cursor is next to Show
History Menu.
Figure A-1. Fault Screen