HP NonStop G-Series - Manual (Page 21)

Overview and Features
N1524A ACL Installation and User’s Guide for the NonStop S-Series Tape Enclosure — 527340-001
1 -5
N1524A ACL Tape Drive
•
To display the Show Status menu only without entering the Menu mode, press
Escape at the Default screen. The system remains online.
Display
The display on the control panel is capable of displaying four lines of 20 characters
each, to allow the use of easy-to-understand messages.
Note. When the Menu mode is entered, the Ready light goes out. This means that the module
is offline, and the system responds to all commands from the server with a SCSI Not Ready
message until the Menu mode is exited, and the Ready light goes on.
Table 1-2. Control Panel Functions
Screen Escape Enter Up arrow Down arrow
POST N.A. N.A. N.A. N.A.
Default Displays Show
Status menu Enters
Menu
mode N.A. N.A.
Status Menu
(while online) Returns to Default
screen Same as in
Menu
mode Same as in
Menu mode Same as in
Menu mode
In Menu
Mode Rejects currently
displayed choice,
or
Aborts Control
Panel operation in
progress, or
Exits to next
higher
menu level, or
Exits Menu mode
to
Default screen
Accepts
currently
displayed
choice Scrolls one line
up through list
of options, or
Scrolls part of
display one
line to top of
list of options
Scrolls one
line down
through list of
options, or
Scrolls part of
display one
line to bottom
of list of
options
Fault N.A. Clears Soft
Errors N.A. N.A.