HP NonStop G-Series - Manual (Page 84)

Maintaining the Tape Drive
N1524A ACL Installation and User’s Guide for the NonStop S-Series Tape Enclosure — 527340-001
5 -2
Running From the Front Panel
5. Insert the magazine in the tape drive.
6. Close the magazine door.
If you enable the Autoclean mode on the Configuration menu, the ACL runs the
cleaning cartridge automatically whenever the Use Cleaner LED comes on.
Running From the Front Panel
This procedure requires that the cleaning cartridge be installed in Slot 1 of the
magazine and that no reserved slots are set.
1. At the Default screen, press Enter. The Main menu appears in Figure 5-1 .
Note. The cleaning cartridge is abrasive. Use it only when the Use Cleaner LED comes on.
Figure 5-1. Main Menu