HP NonStop G-Series - Manual (Page 56)

Operating the Tape Drive
N1524A ACL Installation and User’s Guide for the NonStop S-Series Tape Enclosure — 527340-001
4- 12
Exiting the Main Menu
Using the up arrow and down arrow scroll buttons, set the first digit of the unlock
code. When it is set, press Enter to move the cursor to the second digit and
repeat the process. After you enter the entire unlock code using this process,
press Escape. Then press Enter to confirm the entry. If the code is correct, the
Main menu appears. If the code is incorrect, an error screen appears.
Exiting the Main Menu
To leave the Menu mode and return to the Default screen, press Escape
repeatedly. Each time you press Escape, you move up a menu level. When the
Main menu is visible, pressing Escape once returns you to the Default screen.
Navigating the Main Menu
To select a menu, move the ! to the desired line by using the " and # scroll
buttons. Press Enter to confirm the selection and display the menu. The ! at
the end of the fourth line of the Main menu means one or more additional
options can be reached by scrolling, using the
# button. The options are:
•
Load/Unload
•
Unlock Door
•
Show Status Menu
•
Maintenance Menu
•
Configure Menu
•
Show History Menu
•
Security Menu.
The Main menu selections are described next.
Load/Unload
For a description of the Load/Unload menu see Loading and Unloading Tape
Cartridges .
Unlock Door
If you scroll to Unlock Door and press Enter, the magazine door swings open.