HP NonStop G-Series - Manual (Page 68)

Operating the Tape Drive
N1524A ACL Installation and User’s Guide for the NonStop S-Series Tape Enclosure — 527340-001
4- 24
Displaying Firmware Revision
When you press Enter, the screen in Figure 4-16 appears.
Scroll to set the first digit of the unlock code. Press Enter to move the cursor to
the second digit and repeat the process. After you enter the unlock code, press
Escape. Press Enter to validate the unlock code or Escape to exit. If the code is
correct, the Main menu appears. If the code is incorrect, an error screen
appears.
Displaying Firmware Revision
You can display the library robotics firmware revision at any time from the
Library Status menu under the Show Status menu. It appears on line 2 of the
POST screen and the Initialization screens.
Displaying Error Logs
To display the error history of the tape drive, use the Show History menu:
1. At the Default screen, press Enter to enter the Menu mode. The Main menu
appears.
Figure 4-16. Code Entry Menu