HP NonStop G-Series - Manual (Page 127)

Error Recovery Procedures and Fault Symptom
Codes
N1524A ACL Installation and User’s Guide for the NonStop S-Series Tape Enclosure — 527340-001
C -15
Boot Error Codes
Boot Error Codes
6060 Slave 3 Ch Init Err An error occurred during the 3 Ch slave module
initialization A, B, 1
6061 Slave 3 Ch Sync Err An error occurred attempting to sync with the 3 ch
slave module A, B, 1
6062 Slave 3-Ch Flash Err An error occurred attempting to flash the 3 Ch
slave module A, B, 1
FSC Message Description ERP
B001 Boot ROM CRC Error B, 1
B002 Boot RAM Test Failed B, 1
B004 Boot Comm Open Error B, 1
B005 Boot Novram Error B, 1
B006 Boot Unused Int. B, 1
B007 Flash Init. Error B, 1
B010 Boot UART 0 Error B, 1
B011 Boot UART 1 Error B, 1
B012 Boot UART 2 Error B, 1
B013 Boot UART 3 Error B, 1
B014 Boot UART 4 Error B, 1
FSC Message Description ERP