HP XP Data Shredder Software - Manual (Page 66)

• Group: External LU group number and reference number assigned to each LU in the external
LU group. External Storage XP automatically assigns reference numbers to LUs in the group
when external LUs are mapped. This appears in the format “external LU group number -
reference number of the LU in the group”.
• Ex-Dev. Status: Status of the operation executed to the external array, or status of the path
connection. Possible values: Normal, Unknown, Blockade, Warning, Checking, Cache
Destage, and Disconnect. For a description of these values, see Table 8 .
• LDEV Status: Mapped external LU's status. Possible values: Normal, Unknown, Blockade,
Warning, and Format. For a description of these values, see Table 9 .
• Progress: When Status is Cache Destage, displays the destaging process progress, from 1%
to 100%.
• Characteristic2: External LU's extended identifying information. This information is used for
identifying logical volumes in the EVA array. For more information, see Identifying logical
volumes of EVA arrays (using Characteristic 2) .
• Discovery
• WWN: World Wide Name identifying the port in the external array that can be set.
• Serial: Product serial number.
• Product: Product name.
• Vendor: Vendor name.
• WWN of the external array
• LUN: LU number in the external array.
• Characteristic: External LU's ID number.
• Device: External LU's device name.
• Ex-Dev. info.: Information about the external array. When the external array is an SATA/FATA
drive, an asterisk (*) appears.
• VMA: Information about the VMA setting by LUN Security XP Extension. When VMA is
set for the volume, an asterisk (*) appears.
• Capacity: External LU's capacity in blocks.
• Characteristic2: External LU's extended identifying information. This information is used for
identifying logical volumes in the EVA array. For more information, see Identifying logical
volumes of EVA arrays (using Characteristic 2) .
WWN tree
Displays information about items set in the Device tree. The contents of the WWN list changes depending
on the items selected in the WWN tree.
Figure 31 WWN tree
• Subsystem
When selected, displays nothing in the WWN tree. Subsystem is selected when you initially display
the WWN tree.
• External Devices
When selected, displays information about the external array connected to the external port in the
WWN list.
66 External Storage XP panes