HP Integrity rx4640 Server - Manual (Page 62)

File name Inventory table
Compaq0.MIF (" Compaq0.mif
inventory tables " on page 62 )
• CPU attributes
• EISA/PCI slots
• System attributes
• Memory module attributes
• Portable batteries
• Portable docking station
• Portable PC card slots
Compaq1.MIF (" Compaq1.mif
inventory tables " on page 64 )
IDE devices (not supported in HP servers)
Compaq2.MIF (" Compaq2.mif
inventory tables " on page 64 )
Video monitor (not supported in HP servers)
Compaq3.MIF (" Compaq3.mif
inventory tables " on page 65 )
Health subsystem
Compaq4.MIF (" Compaq4.mif
inventory tables " on page 65 )
• Drive array controller
• Drive array logical drive
• Drive array physical drive
Compaq5.MIF (" Compaq5.mif
inventory tables " on page 66 )
Storage system attributes
Compaq6.MIF (" Compaq6.mif
inventory tables " on page 66 )
SCSI devices
Compaq7.MIF (" Compaq7.mif
inventory tables " on page 66 )
Software version information
Compaq8.MIF (" Compaq8.mif
inventory tables " on page 67 )
Remote insight board information
Compaq9.MIF (" Compaq9.mif
inventory tables " on page 67 )
• Fibre Channel array controller
• Fibre Channel array logical drive
• Fibre Channel array physical drive
• Fibre Channel host controller
• Cluster node information
• Cluster interconnect information
NOTE: File and table entries depend on the hardware installed on the particular client. For example, if the
client is a server, the file for IDE and the table for Portable Batteries will be omitted.
Compaq0.mif inventory tables
The following table contains the contents of the inventory tables in the file Compaq0.mif.
Inventory table Type Description
CPU attributes CPU number Position of particular processor (1–4)
CPU type Class of Intel® processor (for
example, 80486 or Pentium®)
CPU speed CPU speed (in MHz) as determined by
the HP Management Agents
L2 cache Level 2 cache capacity
L3 cache Level 3 cache capacity
HP Insight Inventory Collector 62